Water Quality Instruments


Portable Colorimeter

  • Portable model with 80 preprograms
  • All Wavelength Filters are 428nm, 525nm, 568nm & 635nm.
  • With RS-32 serial port and more.



Turbidity Meter

  • Compact water analysis instrument designed for turbidity, Chlorine and color
  • Used for testing turbidity for various water (Raw water, Purified water, Waste water etc.)
  • Logs memory up to 500 points. Stored results can be viewed directly or downloaded to a computer via USB Cable.

Multiparameter Bentchtop Meter

  • Microprocessor Based Multi-Parameter for Measurement of PH-Conductivity-ORP-TDS-Temp.



Conductivity Meter

  • Portable Microprocessor - based instruments for measuring EC, TDS and Temperature.
  • Range: 0.0 – 20, 200, 2,000 μS, 0 – 200 Ms
  • Five-point calibration
  • Automatic Temperature Compensation

PH /CONDUCTIVITY /TDS POCKET TESTERS

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode Units of measure: pH, S, mS, ppm, ppt, mg/L, g/L, °C, °F Memory stores up to 25 labeled readings

BOD System

Most innovative ecological (mercury-free) system with microprocessor utilizing manometric technology. Features a stirring system offering non-stop operation without risks of interruption or overheating Easy to handle design allows 6 or 10 bottles to be operated at the same time.



COD Analyzer

COD (Chemical Oxygen Demand) is a term used to measure the quality of water. It is a measure of water pollution resulting from organic .

Among the various methods and instruments available, a non-dispersive absorption based instrument has been found to be the best for this. .





Controller for RDO, level troll & multi parameter troll

  • Display, log, and report multiple parameters for process control.
  • Transfer data to a Rugged Reader handheld PC or laptop via Bluetooth wireless technology.
  • Fast response time.
  • Simplifies system integration
  • Meets compliance standards

Portable DO Meter

DO readings displayed in ppm or % saturation units DO calibration at 1 or 2 standard points (0 & 100%) or at 1 custom point (>20%) Automatic temperature compensation setup mode for setting altitude & salinity compensation factors, temperature measure unit (°C or °F), serial communication parameters, date & time, auto-off, instrument.

On-line analyzers for COD monitoring

Three versions of COD on-line analyzers are available:
  • Dichromate method
  • Permanganate method
  • UV direct reading method.

Online COD/BOD/TSS/pH/TOC Analyzer

The UV500 is a on-line water analyser based on a high resolution UV-visible spectrograph. It allows to monitor simultaneously many different parameters for waste water treatment plants or chemical plants with an excellent stability and low operating cost.

The same spectrograph can measure organic matter, nitrate, colour, turbidity, phosphate, ammonia and hydrogen sulphide. A complementary UV-visible fluorescence module allows the measurement of aromatics hydrocarbons (PAH). Nephelometric turbidity by visible or infra-red laser diode is also available.

The full UV-visible spectrum can also be used to monitor specific chemical processes making the UV500 a ideal instrument for chemical plants.

Different materials are available for the flow cell and hydraulic parts depending on the matrix chemical compatibility.


    Parameters :
  • H2S
  • Colour
  • Nitrate
  • Ammonia
  • pH/ORP
  • Turbidity
  • Phosphate
  • UV254-COD
  • Conductivity
  • Hydrocarbons
  • Dissolved Oxygen
    Latest technological Advances :
  • Automatic Cleaning System
  • Mono or Multi-parameter
  • Patented Flow Cell
  • Low Maintenance
  • Reliability