Environmental : Emission monitoring


PM2.5/ PM10 Fine Dust Sampler

  • RS-232C for connection to PC and USB Flash Drive (Optional)
  • EPA Omni-directional ambient particle inlet with 10µ separation assembly & sample transport tube.
  • Programmable Real Time control system with automatic start & stop & digital display of date & time & time of sampling
  • 20x4 LCD display showing parameters in real time

Flow Rate (16.67) LPM, Volumetric Flow

    Barometric Pressure, Ambient Temperature

 Filter Temperature



Meterological Station

  • Wireless Weather Station with Rugged Constrution for rough weather
  • Measurement of following Parameters:-
    Wind speed, Wind direction,Rain bucket,Solar radiation,Temperature,Humidity,Atmospheric pressure With Wireless  data loggerSolar panel Mounting Accessories.
  • Historic Data available date wise from this server. Also saved in a Micro SD card placed inside the Base receiver.

Economical on-line stack emission analyzer

  • Modular design , uses latest technology to meet individual client`s expectation by adjusting it to performing particular measurement such as concentration of various gases ,pressure, temperature and number of boiler parameter .
  • 1 to 4 analyzer from measures CO, CO2 CH4, N2O, with NDIR and O2, CO, NO, NO2 , SO2, H2S, with electrochemical sensor.
  • Measures atmospheric pressure, differential pressure, temperature, lambda, qA , Eta.
  • Measures atmospheric pressure, differential pressure, temperature, lambda, qA , Eta.
  • Data logging with 256Mb MMC and PC program for analyzer setting and data communication and present result onLCD.



Portable Flue Gas Analyzer

  • Total Solution for Boiler Efficiency Analysis
  • Measures O2 , CO, SOx , NOx& Stack Temperature
  • Calculates CO2 , Efficiency, Losses, Excess Air, Net Temperature, CO / CO2 Ratio& Poison Index.
  • Unit in ppm & mg/m3

Continuous ambient air monitoring station

  • Stationary type ambient air monitoring station for measurement of CO, SO2, NOx, O3, PM10, PM2.5 in ambient environment
  • SPM analyzer : operates on the principle of beta ray attenuation and measure particle mass without the effect of shape, size or color of suspended particulate matter.
  • NOx analyzer: operates on the principle of chemiluminescence method range:0-0.1, 0-0.2, 0-0.5, 0-1, 0-2 PPM
  • SO2 analyzer : operates on the principle of UV fluorescence method range: 0-0.05, 0-0.1, 0-0.2, 0-0.5, 0-1ppm
  • CO analyzer : operates on the principle of gas filter correlation method range: 0-5, 0-10, 0-20, 0-50, 0-100ppm
  • O3 analyzer : operates on the principle of UV photometry method range: : 0-0.1, 0-0.2, 0-0.5, 0-1, 0-2 PPM
  • HC analyzer : operates on the principle of gas chromatography method flame ionization detector measures methane and non methane hydrocarbons. range: : 0-5, 0-10, 0-20, 0-50 ppmC
  • Analyzers are available for measurement of other gases like H2S, VOC, BTX, HF, HCL, etc……

All above analyzers are in 19`` rack cabinet and connected to powerful data aquasition system which store more than 5 yr data and software with graphical presentation .


On-Line Extractive Stack Emission Analyzer

  • Continuous stack emission analyzer based on NDIR /UV technology for measurement of 1-6 gases from NOx, NO2 SO2, CO, CO2, NH3, HCL, HF, HC, CH4, BTX etc…from emission. O2 by paramagnetic/zirconia measurement.
  • Probe is installed in stack and analyzer in the room connected with sample line measures high range % to ppm levels or low range ppm to ppb levels.
  • Fast response time.
  • High sensitivity
  • High precision
  • Low drift and easy to maintenance.
  • Simultaneous display of all measured values on large LCD reduces operation cost due to small gas consumption by dry calibration.

On-Line stack Dust Monitor

  • LM 3188 is the cost effective dust monitor ,equipped with a semiconductor laser.
  • It is excellent for measuring at the medium to long distance (3-10m)and medium high concentration(>25 mg/m3)
  • Direct continuous measurement of opacity or optical density
  • Small, light weight, and easy to install.
  • No moving parts and single optics for long life operation
  • Light source in semiconductor laser.

Portable FTIR Gas analyzer

GasmetDCX4030 is a light weight FTIR gas analyzer for ambient air analysis.it`s designed for application where a no. of compounds need to be accurate monitored in ambient air. E.g. include leakage detection and various industrial hygiene application.it`s also well suited for well response/HAZMAT type application.light weight response and fast responcetime. User does not require any previous experience of any analytical instrument to operate this. Typically measures 250 compounds and typically set up tp 50 compound including H2O, CO2, CO, NO, NO2, Sox, NOx, NH2, CH4, HCL, HF, VOC etc…..by using calcamet software.